Chariot Carriers cx 1 Spezifikationen PDF herunterladen (Seite 13)

51100967 - B

USE & FEATURES

5.0 cX dIsk Brake system

A. The brake system involves the use of 3 adjusting

screws: One on the cable splitter (S1) and one on each

of the disk brake calipers (S2 & S3). (See image 1)

B. Whenadjustingbrakesrstmakesurethatallbrake

cable end caps are properly located in the holes of the

adjusting screws. (See image 2)

C. If there is too much play in the brake lever unscrew the

locknut on S1 and adjust (unscrew) S1 until there is light

braking on at least one of the wheels without operating

the brake lever.

D. Screw S1 back in one full turn (clockwise)

E. Tighten the locknut without moving S1.

F. IfadjustmentofS1isnotsufcient,thenproceedwith

adjustment of S2 & S3.

S2 S3

WARNING

Always ensure that the handlebar

grip/ brake lever assembly is securely

fastened to the handlebar.

Do not modify the brake system in any way.

Conversionand/orretrottingofthe

brake system to other carriers is not

permitted.

Do not touch the brake disk after a long

period of use, as the brake disks can

become hot.

Always use the brake as intended.

Follow this Owner`s Manual and comply

with the prescribed maintenance

requirements.

NOTICE

We recommend that brake adjustments

be performed by your Authorized Chariot

Retailer.

NOTICE

Before using the brake system for the rst

time, acquaint yourself with its braking

effect in a safe place.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Keine Kommentare

Chariot Carriers cx 1 Spezifikationen Seite 13